Summit BreezeÂ® Flame Resistant (FR) Coverall

MCR Safety FR Clothing powered by Summit Breeze® Technology is the wave of the future when it pertains to protecting the workforce against flash fire and arc flash hazards. This product provides superior protection by incorporating our patented triple vent technology into our coveralls and shirts which protects the user on multiple levels. Data from the American Burn Institute proves inhalation injury increases the mortality rate from flash fire significantly. The Summit Breeze vented design keeps the wearer cooler, decreasing the chances of heat stress while also redirecting a majority of the off gas away from the breathing zone during a flash fire or arc flash event.

7-ounce 100% Cotton Material

Long Sleeve Coverall with Vented Underarms and Back

3-Inch Triple Trim Reflective Stripes, CAT 2

Patented Underarm and Back Vents, the ultimate solution for comfort, protection, and heat stress.

7-ounce 100% Cotton Material

Patented Triple Vent Technology

2-way FR zipper front

Lay down collar with hook and loop tab for stand-up option

2 Chest flap pockets with zippered closure

Mesh Gas Monitor pocket on right chest

Dual left and right front hip pockets, each with pass through pocket

Two roomy back hip pockets

Tool pocket on right leg

Pencil pocket on left sleeve

Triple needle stitched with Nomex® thread in high wear areas for durability

Elastic waist back for movement and fit

Adjustable two snap closure on each sleeve cuff

Adjustable snap ankle closure

3 Inch FR yellow/silver/yellow reflective stripes on arms and legs

ASTM F1506 Electric Arc Protection, ATPV 8.7 cal/cm2, CAT2

NFPA 2112 UL Certified, NFPA 70E

ASTM 1930 Tested, Certified

Sizes available: 38-62 Regular and Tall

Available in Gray, Navy, Tan, Red, and Royal Blue

TRIPLE VENT SERIES

Patented Summit Breeze® Series Technology offers mesh venting that is incorporated onto the back and under the arms. This Triple Vent construction helps keep the wearer much cooler in warmer environments.

CAPE VENTED

Garments with a cape vented back are constructed in such a way as to to allow air flow in and out of the garment, keeping the wearer cooler in warm environments. The opening that allows air flow is covered by a protective flap, or cape, that prevents hazards from entering the garment.

UL CERTIFIED

These items are Third Party Certified by UL, a world leader in product safety and testing certification.

CAT 2 HAZARD RISK CATEGORY

CAT Rating 2 (CAT2) - Minimum Arc Rating of 8.0 cal/cm2

NFPA 70E-2018 CERTIFIED

Standard for Electrical Safety in the Workplace®

NFPA 2112-2018 CERTIFIED

Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire.

Technical Specifications

SPECS

Color: Royal Blue

Fabric Type: Woven

Flame Resistant: Yes

PERFORMANCE

ASTM F1506 Certified: Yes

ASTM 1930 Certified: Yes

NFPA 70E-2018 Certified: Yes

NFPA 2112-2018 Certified: Yes

Chest	Sizing Type	Part No.
36-38	Regular	SBC203538
36-38	Tall	SBC203538T
40-42	Regular	SBC203540
40-42	Tall	SBC203540T
40-42	Regular	SBC203542
40-42	Tall	SBC203542T
44-46	Regular	SBC203544
44-46	Tall	SBC203544T
44-46	Regular	SBC203546
44-46	Tall	SBC203546T
48-50	Regular	SBC203548
48-50	Tall	SBC203548T
48-50	Regular	SBC203550
48-50	Tall	SBC203550T
52-54	Regular	SBC203552
52-54	Tall	SBC203552T
52-54	Regular	SBC203554
52-54	Tall	SBC203554T
56-58	Regular	SBC203556
56-58	Tall	SBC203556T
56-58	Regular	SBC203558
56-58	Tall	SBC203558T
60-62	Regular	SBC203560
60-62	Tall	SBC203560T
60-62	Regular	SBC203562
60-62	Tall	SBC203562T
64-66	Regular	SBC203564
64-66	Tall	SBC203564T