Summit BreezeÂ® Flame Resistant (FR) Coverall

MCR Safety FR Clothing powered by Summit Breeze® Technology is the wave of the future when it pertains to protecting the workforce against flash fire and arc flash hazards. This product provides superior protection by incorporating our patented triple vent technology into our coveralls and shirts which protects the user on multiple levels. Data from the American Burn Institute proves inhalation injury increases the mortality rate from flash fire significantly. The Summit Breeze vented design keeps the wearer cooler, decreasing the chances of heat stress while also redirecting a majority of the off gas away from the breathing zone during a flash fire or arc flash event.

7-ounce Cotton Material

Long Sleeve Coverall with Vented Underarms and Back

1-Inch Silver Reflective Stripes, CAT 2

Patented Underarm and Back Vents, the ultimate solution for comfort, protection, and heat stress.

7-ounce Cotton Material

Patented Triple Vent Technology

2-way FR zipper front

Lay down collar with hook and loop tab for stand-up option

2 Chest flap pockets with zippered closure

Mesh Gas Monitor pocket on right chest

Dual left and right front hip pockets, each with pass through pocket

Two roomy back hip pockets

Tool pocket on right leg

Pencil pocket on left sleeve

Triple needle stitched with Nomex® in high wear areas for durability

Elastic waist back for movement and fit

Adjustable two snap closure on each sleeve cuff

Adjustable snap ankle closure

1 Inch FR silver reflective stripes on arms and legs

ASTM F1506 Electric Arc Protection, ATPV 8.7 cal/cm2, CAT2

NFPA 2112 UL Certified, NFPA 70E

ASTM 1930 Tested, Certified

Sizes available: 38-62 Regular and Tall

Available in Gray, Navy, Tan, Red, and Royal Blue

TRIPLE VENT SERIES

Patented Summit Breeze® Series Technology offers mesh venting that is incorporated onto the back and under the arms. This Triple Vent construction helps keep the wearer much cooler in warmer environments.

CAPE VENTED

Garments with a cape vented back are constructed in such a way as to to allow air flow in and out of the garment, keeping the wearer cooler in warm environments. The opening that allows air flow is covered by a protective flap, or cape, that prevents hazards from entering the garment.

UL CERTIFIED

These items are Third Party Certified by UL, a world leader in product safety and testing certification.

CAT 2 HAZARD RISK CATEGORY

CAT Rating 2 (CAT2) - Minimum Arc Rating of 8.0 cal/cm2

NFPA 70E-2018 CERTIFIED

Standard for Electrical Safety in the Workplace®

NFPA 2112-2018 CERTIFIED

Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire.

Technical Specifications

SPECS

Color: Navy Blue

Fabric Type: Woven

Flame Resistant: Yes

PERFORMANCE

ASTM F1506 Certified: Yes

ASTM 1930 Certified: Yes

NFPA 70E-2018 Certified: Yes

NFPA 2112-2018 Certified: Yes

Chest	Sizing Type	Part No.
36-38	Regular	SBC201238
36-38	Tall	SBC201238T
40-42	Regular	SBC201240
40-42	Tall	SBC201240T
40-42	Regular	SBC201242
40-42	Tall	SBC201242T
44-46	Regular	SBC201244
44-46	Tall	SBC201244T
44-46	Regular	SBC201246
44-46	Tall	SBC201246T
48-50	Regular	SBC201248
48-50	Regular	SBC201248T
48-50	Regular	SBC201250
48-50	Tall	SBC201250T
52-54	Regular	SBC201252
52-54	Tall	SBC201252T
52-54	Regular	SBC201254
52-54	Tall	SBC201254T
56-58	Regular	SBC201256
56-58	Tall	SBC201256T
56-58	Regular	SBC201258
56-58	Tall	SBC201258T
60-62	Regular	SBC201260
60-62	Tall	SBC201260T
60-62	Regular	SBC201262
60-62	Tall	SBC201262T
64-66	Regular	SBC201264
64-66	Tall	SBC201264T
64-66	Regular	SBC201266
64-66	Tall	SBC201266T
66-68	Regular	SBC201268
68-70	Regular	SBC201270
66-68	Tall	SBC201268T
68-70	Tall	SBC201270T